Armour Making Tutorial - How to roll the edges of armour

Rolling the edge to 90 degrees

In the previous step we formed about 1/4 inch of the egde of the armour outward to aproximately a 45 degree angle. Now use the same technique to bring just the outer 1/8th of the roll to 90 degrees.

Hammering just the outer portion of the edge of the armour

As before, the trick is to work it slowly and evenly in multiple passes. This is all light work which does not require any heavy hammering.

The roll nearing a 90 degree bend

Page 5 - Bringing the roll to 90 degrees.
Age of Armour News and Updates Feed

Subcribe to the Armour feed to be notified of updates and when new armour becomes available.